Alpha Bridge AXFP-10G-LR
Features
- Compliant with XFP-MSA INF-8077i.
- Compliant with 10GFC 1200-SM-LL-L Fiber Channel Standard.
- Compliant with IEEE802.3ae 10GBASE-LW/LR Ethernet
Standard. - Compliant with SONET OC-192 SR-1
SDH STM I-64.1. - Compliant with 10GB over ITU G.709.
- Compliant with ITU G.709.
- Differential LVPECL inputs and CML outputs.
- Single power supply 3.3V.
- TTL signal detect indicator.
- Hot Pluggable.
- Class 1 laser product complies with EN 60825-1.
- RoHS Compliant.
Absolute Maximum Ratings AXFP-10G-LR
Parameter | Symbol | Min. | Max. | Units | Note |
Storage Temperature | TS | -40 | 85 | °C | |
Supply Voltage | Vcc3 | -0.5 | 4.0 | V | |
Input Voltage | VIN | -0.5 | Vcc | V |
Recommended Operating Conditions AXFP-10G-LR
Parameter | Symbol | Min. | Max. | Units | Note |
Case Operating Temperature | TC | 0 | 70 | °C | |
Supply Voltage | Vcc3 | 3.1 | 3.5 | V | |
Supply Current | Icc3 | --- | 500 | mA |
Diagnostics AXFP-10G-LR
Data Address | Parameter | Range | Accuracy |
96-97 | Temperature | -35 °C to 95 °C | ±3°C |
100-101 | Bias Current | 0 to 100mA | ±10% |
102-103 | TX Power | -8 to +2.5dBm | ±2dB |
104-105 | RX Power | -16.5 to +1.5dBm | ±2dB |
106-107 | Vcc3 Voltage | 2.9~3.7 Volts | ±3% |
Transmitter Electro-optical Characteristics AXFP-10G-LR
Parameter | Symbol | Min. | Typ. | Max. | Units | Notes |
Operating date rate | 9.95 | 11.3 | Gbps | |||
Input Reference Clock Rate | Not required | |||||
Output Optical Power | Pout | -6 | --- | -1 | dBm | |
Extinction Ratio | ER | 6 | dB | |||
Center Wavelength | C | 1290 | 1330 | nm | ||
Sidemode Supression ratio | SSRmin | 30 | dB | |||
Relative Intensity Noise | RIN | --- | --- | -130 | dB/Hz | |
Output Eye | Compliant with IEEE802.3ae | |||||
Differential Input Voltage | VDIFF | 0.25 | --- | 1.0 | V | |
Transmit Fault Output-Low | TX_FAULTL | 0.0 | --- | 0.5 | V | |
Transmit Fault Output-High | TX_FAULTH | 2.4 | --- | Vcc | V | |
TX_DISABLE Assert Time | t_off | --- | --- | 10 | μs | |
TX_DISABLE Negate Time | t_on | --- | --- | 2 | ms | |
Time to initialize | t_init | --- | --- | 300 | ms | |
Interrupt assert delay | Interrupt _on | --- | --- | 200 | ms | |
Interrupt negate delay | Interrupt off | --- | --- | 500 | ms | |
P_Down/RST assert delay | P_Down/RST_on | 100 | ms | |||
Mod_NR assert delay | Mod_nr_on | 1 | ms | |||
Mod_NR negate delay | Mod_nr_off | 1 | ms | |||
P-Down reset time | 10 | μs | ||||
RX_LOS assert delay | t_loss_on | 100 | μs | |||
RX_LOS negate delay | t_loss_off | 100 | μs |
Receiver Electro-optical Characteristics AXFP-10G-LR
Parameter | Symbol | Min. | Typ. | Max. | Units | Note |
Receiver Sensitivity | -14.4 | --- | 0.5 | dBm | BER < 10-12 | |
Receiver Sensitivity (OMA) | PIN | --- | --- | -12.6 | dBm | BER < 10-12 |
Stress Receiver Sensitivity (OMA) | PIN | --- | --- | -10.3 | dBm | BER < 10-12 |
Operating Center Wavelength | °C | 1270 | --- | 1600 | nm | |
Optical Return Loss | ORL | 12 | --- | --- | dB | |
Loss of Signal-Asserted | PA | --- | --- | -30 | dBm | |
Loss of Signal-Deasserted | PD | -18 | --- | --- | dBm | |
Differential Output Voltage | VDIFF | 0.5 | 0.65 | 0.8 | V | |
TTL Input High Voltage | 2 | Vcc | V | |||
TTL Input Low Voltage | 0 | 0.8 | V | |||
TTL output High Voltage | 2.4 | --- | Vcc | V | ||
TTL output Low Voltage | 0 | --- | 0.4 | V | ||
Receiver Loss of Signal Assert Time (off to on) | tA,RX_LOS | --- | --- | 100 | μs | |
Recover Loss of Signal Assert Time (on to off) | tD,RX_LOS | --- | --- | 100 | μs |
Pin Descriptions AXFP-10G-LR
Pin | Logic | Symbol | Name/Description | Note |
1 | GND | Module Ground | 1 | |
2 | VEE5 | Optional -5.2V Power Supply | ||
3 | LVTTL-I | Mod_DeSel | Module De-select; When held low allows module to respond to 2-wire serial interface | |
4 | LVTTL-O | Interrupt | Interrupt; Indicates presence of an important condition which can be read over the 2-wire serial interface | 2 |
5 | LVTTL-I | TX_DIS | Transmitter Disable; Turns off transmitter laser output | |
6 | VCC5 | +5V Power Supply | ||
7 | GND | Module Ground | 1 | |
8 | VCC3 | +3.3V Power Supply | ||
9 | VCC3 | +3.3V Power Supply | ||
10 | LVTTL-I/O | SCL | 2-Wire Serial Interface Clock | 2 |
11 | LVTTL-I/O | SDA | 2-Wire Serial Interface Data Line | 2 |
12 | LVTTL-O | Mod_Abs | Indicates Module is not present. Grounded in the Module | 2 |
13 | LVTTL-O | Mod_NR | Module Not Ready; Indicating Module Operational Fault | 2 |
14 | LVTTL-O | RX_LOS | Receiver Loss of Signal Indicator | 2 |
15 | GND | Module Ground | 1 | |
16 | GND | Module Ground | 1 | |
17 | CML-O | RD- | Receiver Inverted Data Output | |
18 | CML-O | RD+ | Receiver Non-Inverted Data Output | |
19 | GND | Module Ground | 1 | |
20 | VCC2 | +1.8V Power Supply | 3 | |
21 | LVTTL-I | P_Down/RST | Power down; When high, requires the module to limit power consumption to 1.5W or below, 2-Wire serial interface must be functional in the low power mode. | |
Reset; The falling edge initiates a complete reset of the module including the 2-wire serial interface, equivalent to a power cycle. | ||||
22 | VCC2 | +1.8V Power Supply | 3 | |
23 | GND | Module Ground | 1 | |
24 | PECL-I | RefCLK+ | Not Required | |
25 | PECL-I | RefCLK- | ||
26 | GND | Module Ground | 1 | |
27 | GND | Module Ground | 1 | |
28 | CML-I | TD- | Transmitter Inverted Data Input | |
29 | CML-I | TD+ | Transmitter Non-Inverted Data Input | |
30 | GND | Module Ground | 1 |
Ordering Information AXFP-10G-LR
Model Number | Part Number | Reach | Input/Output | Signal Detect | Voltage | Temprature |
AXFP-10G-LR | OP7K-S10-13-C | 10 km | AC/AC | TTL | 3.3V | 0°C to 70 °C |