Alpha Bridge ASFPP-10G-eLR33B

Features

• Support 95Gb/s to 10.3Gb/s data rates
• Simplex LC Connector Bi-Directional SFP+ Optical Transceiver
• Single 3V Supply
• Up to 20km on 9/125um SMF
• 1330nm DFB Laser transmitter,1270nm receiver
• Compliant with IEEE 3ae 10GBASE-LR and 10GBASE-LW
• SFP+ MSA SFF-8431 Compliant
• Digital Diagnostic SFF-8472 Compliant
• RoHS compliant and Lead Free
• Operating case temperature: 0°C ~70°C

Applications

• 10GBASE-LR at 3125Gbps
• 10GBASE-LW at 953Gbps
• Other Optical Links

Absolute Maximum Ratings

Parameters	Symbol	Min.	Max.	Units
Supply Voltage	VCC	-0.5	3.6	V
Storage Temperature	Tc	-40	85	°C
Operating Case Temperature	Tc	0	70	°C
Relative Humidity	RH	0	85	%

Recommended Operating Conditions

Parameter	Symbol	Min.	Typ.	Max.	Units
Supply Voltage	VCC	3	3.3	3.6	V
Supply Current	Icc		300	420	mA
Operating Case Temperature	TC	0	25	70	°C
Module Power Dissipation	Pm	-	1	1.5	W

Diagnostics Monitoring

Parameter/Range	Symbol	Accuracy	Unit	Notes
Temperature monitor absolute error	DMI_Temp	± 3	oC
Supply voltage monitor absolute error	DMI_VCC	±0.3	V
TX power	DMI_TX	± 3 dB	dBm
RX power	DMI_RX	± 3 dB	dBm
Bias Current monitor	DMI_Ibias	± 10%	mA

Optical Characteristics

Parameter	Symbol	Min.	Typ.	Max.	Units	Note
Transmitter
Optical Wavelength	λC	1320	1330	1340	nm
Side Mode Suppression Ratio	SMSR	30			dB
Spectral Width (-20dB)	Δλ			1	nm
Average Output Power	Pop	-2		2	dBm	1,2
Extinction Ratio	ER	3.5			dB
Eye Mask	Compliant with IEEE 802.3
Transmitter Dispersion Penalty	TDP		3.2	dB
Launch Power of OFF Transmitter	POUT_OFF			-30	dBm
Relative Intensity Noise	RIN		-128	dB/Hz
Receiver
Center wavelength	λC	1260	1270	1280	nm
Average Receiver Power	PSENS			-14.1	dBm	2,3
Receiver Overload	PMAX			0.5	dBm
LOS Assert	LOSA	-30			dBm
LOS De-assert	LOSD			-15	dBm
LOS Hysteresis	LOSH	0.5			dB

Electrical Characteristics

Parameter	Symbol	Min.	Typ.	Max.	Units	Note
Transmitter
Input differential impedance	RIN		100		Ω	2
Single-ended data input swing	Vin_PP	150		1200	mVpp
Transmit Disable Voltage	VD	2		Vcc	V
Transmit Enable Voltage	VEN	VEE		VEE+0.8	V	3
Receiver
Output Differential impedance	Rout		100		Ω	2
Single Ended Data Output Swing	VOUT_PP	300		700	mV	4
LOS Fault	VLOS fault	2		VCCHOST	V	5
LOS Normal	VLOS norm	VEE		VEE+0.8	V	5

Pin Assignment

Pin	Name	Description	Notes
1	VEET	Transmitter ground (common with receiver ground)	1
2	TX_FAULT	Transmitter Fault	2
3	TX_DISABLE	Transmitter Disable. Laser output disabled on high or open	3
4	SDA	2-wire Serial Interface Data Line	4
5	SCL	2-wire Serial Interface Clock Line	4
6	MOD_ABS	Module Absent. Grounded within the module	4
		RS0 for Rate Select: Open or Low = Module supports ≤4.25Gbps
7	RS0	High = Module supports 9.95 Gb/s to 10.3125 Gb/s
8	LOS	Loss of Signal indication. Logic 0 indicates normal operation	5
9	RS1	No connection required	1
10	VEER	Receiver ground (common with transmitter ground)	1
11	VEER	Receiver ground (common with transmitter ground)	1
12	RD–	Receiver Inverted DATA out. AC coupled
13	RD+	Receiver Non-inverted DATA out. AC coupled
14	VEER	Receiver ground (common with transmitter ground)	1
15	VCCR	Receiver power supply
16	VCCT	Transmitter power supply
17	VEET	Transmitter ground (common with receiver ground)	1
18	TD+	Transmitter Non-Inverted DATA in. AC coupled
19	TD–	Transmitter Inverted DATA in. AC coupled
20	VEET	Transmitter ground (common with receiver ground)	1

Ordering Information

Model Number	Part Number	TX/RX	Voltage	Reach	Temperature
ASFP-10G-eLR33B	OPAK-W20-33-CF	1330/1270	3.3V	20 km	0°C to 70 °C

Download Brochure