ASFP-10G-SR -

Features

Optical interface compliant to IEEE 3ae 10GBASE-SR
Electrical interface compliant to SFF-8431
Hot Pluggable
850nm VCSEL transmitter, PIN photo-detector
Maximum link length of 300m on 2000MHz/km MMF
Operating case temperature: 0 to 70 °C
Low power consumption
Maximum link length of 300m on 2000MHz/km MMF
All-metal housing for superior EMI performance
Advanced firmware allows customer system encryption information to be stored in the transceiver
Cost effective SFP+ solution, enables higher port densities and greater bandwidth
RoHS6 compliant (lead-free)

Parameter/Range	Symbol	Accuracy	Unit	Notes
Temperature monitor absolute error	DMI_Temp	± 3	°C
Supply voltage monitor absolute error	DMI_VCC	±0.3	V
TX power	DMI_TX	± 3 dB	dBm
RX power	DMI_RX	± 3 dB	dBm
Bias Current monitor	DMI_Ibias	± 10%	mA

Parameter	Symbol	Min.	Typ.	Max.	Units	Note
Transmitter
Center Wavelength	λt	840	850	860	nm
RMS spectral width	Pm	-	-	Note 1	nm
Average Optical Power	Pavg	-6.5	-	-1	dBm	2
Extinction Ratio	ER	3.5	-	-	dB	3
Transmitter Dispersion Penalty	TDP	-	-	3.9	dB
Relative Intensity Noise	Rin	-	-	-128	dB/Hz	12dB reflection
Optical Return Loss Tolerance		-	-	12	dB
Receiver
Center Wavelength	λr	840	850	860	nm
Receiver Sensitivity	Psens	-	-	-11.1	dBm	4
Stressed Sensitivity in OMA		-	-	-7.5	dBm	4
Los function	Los	-30	-	-12	dBm
Overload	Pin	-	-	-1.0	dBm	4
Receiver Reflectance		-	-	-12	dB

Parameter	Symbol	Min.	Typ.	Max.	Units	Note
Data Rate		-	10.3125	-	Gbps
Power Consumption		-	1200	1500	mV
Transmitter
Single Ended Output Voltage Tolerance		-0.3	-4.0	4.0	V
C common mode voltage tolerance		15	--		mV
Tx Input Diff Voltage	VI	180		700	mV
Tx Fault	VoL	-0.3		0.4	V	At 0.7mA
Data Dependent Input Jitter	DDJ			0.10	UI
Data Input Total Jitter	TJ			0.28	UI
Receiver
Single Ended Output Voltage Tolerance		-0.3	-	4.0	V
Rx Output Diff Voltage	Vo	300		850	mV
Rx Output Rise and Fall Time (20% to 80%)	Tr/Tf	30			ps	20% to 80%
Total Jitter	TJ			0.70	UI
Deterministic Jitter	DJ			0.42	UI

Pin	Symbol	Function/Description	Notes
1	VEET	Transmitter Ground	1
2	Tx_FAULT	Transmitter Fault	2
3	Tx_DIS	Transmitter Disable. Laser output disabled on high or open	3
4	SDA	2-wire Serial Interface Data Line	2
5	SCL	2-wire Serial Interface Clock Line	2
6	MOD_ABS	Module Absent. Grounded within the module	4
7	RS0	Rate Select 0	5
8	RX_LOS	Loss of Signal indication. Logic 0 indicates normal operation	2
9	RS1	Rate Select 1	5
10	VEER	Receiver Ground	1
11	VEER	Receiver Ground	1
12	RD-	Receiver Inverted DATA out. AC Coupled
13	RD+	Receiver DATA out. AC Coupled
14	VEER	Receiver Ground	1
15	VCCR	Receiver Power Supply
16	VCCT	Transmitter Power Supply
17	VEET	Transmitter Ground	1
18	TD+	Transmitter DATA in. AC Coupled
19	TD-	Transmitter Inverted DATA in. AC Coupled
20	VEET	Transmitter Ground	1

Model Number	Part Number	Wavelength	Temperature
ASFP-10G-SR	OPAT-MX3-85-CB	850nm	0°C to 70 °C