Alpha Bridge ASFPP-10G-ER 1310
Product Features
- 10Gb/s serial optical interface compliant to 802.3ae 10GBASE-ER/EW
- Electrical interface compliant to SFF-8431 specifications
- 1550nm cooled EML transmitter with TEC, PIN photo detector
- 2-wire interface for management specifications compliant with SFF 8472
Standard - Operating case temperature: 0 to 70 C
- All-metal housing for superior EMI performance
- Low power consumption, less than 1.
- Advanced firmware allow customer system encryption information to be
stored in transceiver - Cost effective SFP+ solution, enables higher port densities and greater
bandwidth. - RoHS compliant
Applications
- 10GBASE-ER/EW.
- 10GBASE-ER/EW + FEC.
- 10G Storage system.
Recommended Operating Conditions
Parameter | Symbol | Min. | Typ. | Max. | Units | Note |
Data Rate | DR | 9.83 | 10.3125 | 11.3 | Gb/s | 1 |
Bit Error Rate | BER | 12-Oct | ||||
Operating Temperature | TC | 0 | 70 | °C | 2 | |
Storage Temperature | TSTO | -40 | 85 | °C | 3 | |
Supply Current | ICC | 250 | 270 | mA | 4 | |
Input Voltage | VCC | 3.14 | 3.3 | 3.46 | V | |
Maximum Voltage | VMAX | -0.5 | 4 | V | 4 |
Link Distances
Data Rate | Fiber Type | Distance Range (m) |
9.83 –11.3 Gb/s | 9/125umSMF | 40 |
Transmitter Electro-optical Characteristics
Parameter | Symbol | Min. | Typ. | Max. | Units | Notes |
Output Optical Power | PTX | 2 | 5 | dBm | 1 | |
Optical Center Wavelength | λC | 1290 | 1310 | 1330 | nm | |
Extinction Ratio | ER | 3.5 | 5.5 | dB | ||
Spectral Width (-20dB) | Δλ | 0.6 | nm | |||
Side Mode Suppression Ratio | SMSR | 30 | dB | |||
Relative Intensity Noise | RIN | -128 | dB/ Hz | |||
Transmitter Dispersion Penalty | TDP | 3.2 | dB | |||
Transmitter Jitter | According to IEEE 802.3ae requirement | |||||
Launch Power of OFF Transmitter | POUT_OFF | -30 | dBm | 1 | ||
Input differential impedance | RIN | 100 | Ω | |||
Differential data input swing | VIN_PP | 180 | 700 | mV | ||
Transmit disable voltage | VD | 2 | VCC | V | ||
Transmit enable voltage | VEN | VEE | VEE+0.8 | V |
Receiver Electro-optical Characteristics
Parameter | Test Point | Min | Typ. | Max | Units | Notes |
Optical Center Wavelength | λC | 1260 | 1600 | nm | ||
Receiver Overload | POL | 0.5 | dBm | |||
Receiver Sensitivity @10.3Gb/s | RX_SEN1 | -14.4 | dBm | 1 | ||
Receiver Reflectance | TRRX | -12 | dB | |||
LOS Assert | LOSA | -30 | dBm | |||
LOS De-Assert | LOSD | -16 | dBm | |||
LOS Hysteresis | LOSH | 0.5 | dB | |||
Single ended data output swing | VOUT PP | 300 | 850 | mV | ||
Data output rise time/fall time (20%-80%) | tr /tf | 28 | ps | |||
LOS Assert | LOS A | 2 | VCC HOST | V | ||
LOS De-Assert | LOS D | VEE | VEE+0.5 | V |
Pin Descriptions
Pin | Symbol | Function/Description | Notes |
1 | VEET | Transmitter ground (common with receiver ground) | 1 |
2 | TX_FAULT | Transmitter Fault | |
3 | TX DISABLE | Transmitter Disable. Laser output disabled on high or | 2 |
open | |||
4 | SDA | 2-wire Serial Interface Data Line | 3 |
5 | SCL | 2-wire Serial Interface Clock Line | 3 |
6 | MOD ABS | Module Absent. Grounded within the module | 3 |
7 | RS0 | No connection required | |
8 | LOS | Loss of Signal indication. Logic 0 indicates normal | 4 |
operation | |||
9 | RS1 | No connection required | 1 |
10 | VEER | Receiver ground (common with transmitter ground) | 1 |
11 | VEER | Receiver ground (common with transmitter ground) | 1 |
12 | RD– | Receiver Inverted DATA out. AC coupled | |
13 | RD+ | Receiver Non-inverted DATA out. AC coupled | |
14 | VEER | Receiver ground (common with transmitter ground) | 1 |
15 | VCCR | Receiver power supply | |
16 | VCCT | Transmitter power supply | |
17 | VEET | Transmitter ground (common with receiver ground) | 1 |
18 | TD+ | Transmitter Non-Inverted DATA in. AC coupled | |
19 | TD– | Transmitter Inverted DATA in. AC coupled | |
20 | VEET | Transmitter ground (common with receiver ground) | 1 |
Ordering Information
Model Number | Part Number | Voltage | Temperature |
ASFPP-10G-ER13 | OPAK-S40-13-CD | 3.3V | 0°C to 70°C |