Alpha Bridge AQSFP28-100G-LR4-CY
Features
- Compliant with QSFP28 Standard: SFF-8661 Revision 9, SFF-8636 Revision 2.10a
- Compliant to IEEE 3-2018 100GBASE-LR4 and OTU4 4I1-9D1F
- High speed I/O electrical interface (CAUI-4) compliant with IEEE 3-2018
- Single 3V Supply Voltage
- LAN WDM EML laser and PIN Receiver Array
- QSFP28 MSA package with duplex LC connector
- Two Wire Serial Interface with Digital Diagnostic Monitoring
- Maximum power consumption 5W
- LC duplex connector
- Complies with EU Directive 2011/65/EU (RoHS compliant)
- Class 1 Laser
- Commercial case temperature range of 0°C to 70°C
Description
This 100G LR4 product is designed for 10km optical communication applications, and it is com-pliant to IEEE 802.3ba for 100GE Ethernet. This module contains 4-lane optical transmitter, 4-lane optical receiver and module management block including 2 wire serial interface. The optical signals are multiplexed to a single-mode fiber through an industry standard LC connector.
Absolute Maximum Ratings AQSFP28-100G-LR4-CY
Parameter | Symbol | Min. | Typ. | Max. | Units | Note |
Storage Temperature | TS | -40 | 85 | °C | ||
Supply Voltage | Vcc | -0.3 | 3.6 | V | ||
Relative Humidity | RH | 5 | 95 | % | 1 | |
Data Input Voltage-Differential | IVDIP-VDINI | 1.0 | V | |||
Control Input Voltage | VI | -0.3 | Vcc+0.5 | V | ||
Control Output Current | Io | -20 | 20 | mA |
Note:
- non-condensing.
Recommended Operating Conditions AQSFP28-100G-LR4-CY
Parameter | Symbol | Min. | Typ. | Max. | Units | Note |
Supply Voltage | Vcc | 3.135 | 3.3 | 3.465 | V | |
Case Temperature | Top | 0 | 70 | °C | ||
Instantaneous Peak Current at Hot Plug | Icc_IP | 1400 | mA | |||
Sustained Peak Current at Hot Plug | Icc_SP | 1155 | mA | |||
Maximum Power Dissipation | PD | 3.5 | W | |||
Maximum Power Dissipation. Low Power Mode | PDLP | 1.5 | W | |||
Aggregate Bit Rate | ABR | 103.125 | 111.8 | Gb/s | ||
Data Rate Per Lane | DRL | 25.78 | 27.95 | Gb/s | ||
Control Input Voltage-High | VIH | Vcc+0.7 | Vcc+0.3 | V | ||
Control Input Voltage-Low | VIL | -0.3 | Vcc+0.3 | V | ||
Two Wire Serial Interface Clock Rate | 400 | kHz | ||||
Module Power Supply Noise Tolerance 10Hz-10MHz (peak to peak) | 66 | mVpp | ||||
Rx Differential Data Output Load | 100 | ohms | ||||
Operating Distance | 2 | 10 | km |
Diagnostics Monitoring AQSFP28-100G-LR4-CY
Performance Item | Range | Monitor Error | Notes |
Module Temperature | 0~70 | ±3°C | |
Module Voltage | 0 to Vcc | ±3% | |
Tx Bias Current ,each Lane | 0 to 100 | ± 10% | |
Tx Output Power ,each Lane | -4.3 to 4.5 | ± 3dB | |
Rx Power, each Lane | -10.6 to 4.5 | ± 3dB |
Optical Characteristics AQSFP28-100G-LR4-CY
Parameter | Symbol | Min. | Typ. | Max. | Units | Note |
Transmit Wavelengths | 1294.53 | 1295.56 | 1296.59 | nm | ||
1299.02 | 1300.05 | 1301.09 | nm | |||
1303.54 | 1304.58 | 1305.63 | nm | |||
1308.09 | 1309.14 | 1310.19 | nm | |||
Transmitter | ||||||
Side-mode Suppression Ratio | SMSR | 30 | dB | |||
Total Average Launch Power | 10.5 | dBm | ||||
Average launch power, each Lane | PAVG | -4.3 | 4.5 | -4.3 | dBm | |
Optical Modulation Amplitude (OMA), each Lane | POMA | -1.3 | 4.5 | -1.3 | dBm | |
Transmitter and Dispersion Penalty (TDP), each lane | 2.2 | dB | ||||
Extinction Ratio | ER | 4 | dB | |||
Launch Power in OMA minus TDP, each Lane | OMA-TDP | -2.3 | dBm | |||
Difference in Launch Power Between Any Two Lanes (OMA) | DT_OMA | 5 | dB | |||
Transmitter and Dispersion Penalty, each Lane | TDP | 2.2 | dB | |||
Optical Return Loss Penalty, each Lane | ORLT | 20 | dB | |||
Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3} | {0.25, 0.4, 0.45, 0.25, 0.28, 0.4} | |||||
RIN20OMA | RIN | -130 | dB/Hz | |||
Receiver | ||||||
Receiver Sensitivity (OMA), each Lane | -8.6 | dBm | ||||
Stressed Receiver Sensitivity in OMA, each Lane | -6.8 | dBm | ||||
Damage Threshold for Receiver | Pin, Damage | 5.5 | dBm | |||
Average Receiver Power, each Lane | -10.6 | 4.5 | dBm | |||
Receiver Power in OMA, each Lane, Overload | OMA | .5 | dBm | |||
Difference in Receive Power Between Any Two Lanes (OMA) | DR_OMA | 5.5 | dB | |||
Reflectance of Optical Network Element | -26 | dB | ||||
Receiver 3dB Electrical Upper Cut-off Frequency, each Lane | F_C | 31 | GHz | |||
Receiver Reflectance | RXR | -26 | dB | |||
Vertical Eye Closure Penalty, each Lane | 1.8 | dB | ||||
Stressed Eye J2 Jitter, each Lane | 0.3 | UI | ||||
Stressed Eye J9 Jitter, each Lane | 0.47 | UI |
Electrical Characteristics AQSFP28-100G-LR4-CY
Parameter | Symbol | Min. | Typ. | Max. | Units | notes |
Power Consumption | 3.5 | W | ||||
Transmitter (each Lane) | ||||||
Differential Data Input Amplitude | Vin, pp | 95 | 900 | mV | At 1 Hz | |
Differential Termination Mismatch | 10 | % | ||||
VIL | -0.3 | 0.8 | V | |||
LPMode, Reset and ModSell | VIH | 2 | Vcc+0.3 | V | ||
Differential output voltage swing | Vout,pp | 900 | mVpp | |||
Differential Termination Re- sistance Mismatch | 10 | % | At 1 MHz | |||
Transition Time (20% ~ 80%) | Trise/Tfall | 12 | ps | |||
ModPrsL, and IntL | VOL | 0 | 0.4 | V | ||
VOH | Vcc-0.5 | Vcc+0.3 | V |
Pin Descriptions AQSFP28-100G-LR4-CY
Pin | Symbol | Name/Description | Notes |
1 | GND | Ground | 1 |
2 | Tx2n | Transmitter Inverted Data Input | |
3 | Tx2p | Transmitter Non-Inverted Data Input | |
4 | GND | Ground | 1 |
5 | Tx4n | Transmitter Inverted Data Input | |
6 | Tx4p | Transmitter Non-Inverted Data Input | |
7 | GND | Ground | 1 |
8 | ModSelL | Module Select | |
9 | ResetL | Module Reset | |
10 | Vcc Rx | +3.3V Power Supply Receiver | 2 |
11 | SCL | 2-wire serial interface clock | |
12 | SDA | 2-wire serial interface data | |
13 | GND | Ground | 1 |
14 | Rx3p | Receiver Non-Inverted Data Output | |
15 | Rx3n | Receiver Inverted Data Output | |
16 | GND | Ground | 1 |
17 | Rx1p | Receiver Non-Inverted Data Output | |
18 | Rx1n | Receiver Inverted Data Output | |
19 | GND | Ground | 1 |
20 | GND | Ground | 1 |
21 | Rx2n | Receiver Inverted Data Output | |
22 | Rx2p | Receiver Non-Inverted Data Output | |
23 | GND | Ground | 1 |
24 | Rx4n | Receiver Inverted Data Output | |
25 | Rx4p | Receiver Non-Inverted Data Output | |
26 | GND | Ground | 1 |
27 | ModPrsL | Module Present | |
28 | IntL | Interrupt | |
29 | Vcc Tx | +3.3V Power supply transmitter | |
30 | Vcc1 | +3.3V Power supply | |
31 | LPMode | Low Power Mode | |
32 | GND | Ground | |
33 | Tx3p | Transmitter Non-Inverted Data Input | |
34 | Tx3n | Transmitter Inverted Data Input | |
35 | GND | Ground | |
36 | Tx1p | Transmitter Non-Inverted Data Input | |
37 | Tx1n | Transmitter Inverted Data Input | |
38 | GND | Ground |
Notes:
- GND is the symbol for signal and supply (power) common for the module. All any common within the module and all module voltages are referenced to this potential unless otherwise noted. Connect these directly to the host board signal-common ground
- VccRx, Vcc1 and VccTx are applied concurrently and may be internally connected within the module in any Vcc contacts in SFF-8672 each have a steady state current rating of 1A.
Ordering Information AQSFP28-100G-LR4-CY
Model Number | Part Number | Voltage | Temperature |
AQSFP28-100G-LR4-CY | OPCW-S10-13-CY | 3.3V | 0°C to 70 °C |