Alpha Bridge ASFPP-F-A0-AK
Features
- Full-duplex active optical cable
- Up to 10.3125Gb/s per channel
- Hot-pluggable SFP+ MSA-compliant connectors
- 1W maximum power dissipation per end
- Built-in digital diagnostic functions
- Commercial operating case temperature range: 0 to 70°C
- RoHS-6 compliant (lead free)
Application
- High performance computing interconnect
- 10G Ethernet interconnect
Absolute Maximum Ratings
| Parameter | Symbol | Min. | Max. | Units | Note |
| Supply Voltage | Vcc | -0.3 | 3.6 | V | |
| Storage Temperature | TS | -40 | 85 | °C | |
| Case Operating Temperature | Tc | 0 | 70 | °C | |
| Relative Humidity | RH | 5 | 85 | % | 1 |
Transmitter Characteristics
| Parameter | Symbol | Min. | Typ. | Max. | Units | Note |
| Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | |
| Supply Current | Icc | 230 | mA | |||
| Input differential impedance | Zin | 90 | 100 | 110 | Ω | 1 |
| Differential Data Input Swing | Vin, pp | 40 | 100 | mV | ||
| Transmit Disable Voltage | VD | 2.0 | Vcc | V | ||
| Transmit Enable Voltage | VEN | 0 | 0.8 | V |
Receiver Characteristics
| Parameter | Symbol | Min | Typ. | Max | Units | Notes |
| Differential Data Output Swing | Vout, pp | 300 | 850 | mV | ||
| LOS Fault | VLOS fault | 2 | Vcc | V | 2 | |
| LOS Normal | VLOS norm | 0 | 0.8 | V | 2 |
SFP+ AOC Specifications
| Parameter | Description |
| Module Form Factor | SFP+ (As defined by SFP+ MSA, "SFF-8431 Rev 4.1", "SFF-8432 Rev 5.1") |
| Maximum Data Rate | 10.3125Gb/s |
| Cable Lengths | Up to 300m using OM3 MMF and 400m using OM4 MMF |
| Protocols Supported | 10G Ethernet |
| Electrical Interface and Pin-out | 20-pin edge connector |
| Cable Type | Multimode round fiber cable, plenum-rated |
| Maximum Power Consumption per End | 1W |
| Management Interface | Serial, I2C-based (As defined by "SFF-8472 Rev 11.0".) |
Ordering information
| Part Number | Model Number | Length (M) | Voltage | Temperature |
| ASFPP-F-A0-AK | Active Optical Cable | 100 | 3.3V | 0°C to 70 °C |
