Alpha Bridge AQSFP-40G-PSM4-I
Features
• 4 Parallel lanes design
• Up to 11.2Gbps per channel bandwidth
• MPO optical connector
• Compliant with 40G Ethernet IEEE802.3ba and 40GBASE-LR4 Standard
• QSFP MSA-compliant
• Up to 2 km transmission
• Compliant with QDR/DDR Infiniband data rates
• Single +3.3V power supply operating
• Built-in digital diagnostic functions
• Temperature range -40°C to 85°C
• RoHS Compliant
Applications
• Infiniband QDR and DDR interconnects
• Datacenters
• Switches and Routers
• 40G BASE-LR4 Ethernet Links
Product Description
AQSFP-40G-PSM4-I is a transceiver module designed for 2Km optical communication applications. The design is compliant with 40GBASE-LR4 of the IEEE P802.3ba standard. It provides increased port density and total system cost savings. The QSFP+ full-duplex optical module offers 4 independent transmit and receive channels, each capable of 10Gb/s operation for an aggregate data rate of 40Gb/s on 10km of single-mode fiber.
The product is designed with a form factor, optical/electrical connection, and digital diagnostic interface according to the QSFP Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity, and EMI interference.
The module operates from a single +3.3V power supply and LVCMOS/LVTTL global control signals such as Module Present, Reset, Interrupt and Low Power Mode are available with the modules. A 2-wire serial interface is available to send and receive more complex control signals and to obtain digital diagnostic information. Individual channels can be addressed and unused channels can be shut down for maximum design flexibility.
YV-QSFP+P2 is designed with form factor, optical/electrical connection and digital diagnostic interface according to the QSFP Multi-Source Agreement (MSA). It has been designed to meet the harshest external operating conditions including temperature, humidity and EMI interference. The module offers very high functionality and feature integration, accessible via a two-wire serial interface.
Absolute Maximum Ratings
Parameter | Symbol | Min. | Typical | Max. | Unit |
Storage Temperature | TS | -40 | 85 | °C | |
Supply Voltage | VCCT, R | -0.3 | 3.6 | V | |
Relative Humidity | RH | 0 | 85 | % |
Recommended Operating Conditions
Parameter | Symbol | Min. | Typical | Max. |
Case operating Temperature | TC | -40 | 85 | |
Supply Voltage | VCCT, R | 3.13 | 3.3 | 3.47 |
Supply Current | ICC | 757 | ||
Power Dissipation | PD | 2.5 |
Electrical Characteristics
Parameter | Symbol | Min | Typ | Max | Unit | Note |
Data Rate per Channel | - | 10.3125 | 11.2 | Gbps | ||
Power Consumption | - | 1.7 | 2.5 | W | ||
Supply Current | Icc | - | 515 | 757 | mA | |
Control I/O Voltage-High | VIH | 2 | Vcc | V | ||
Control I/O Voltage-Low | VIL | 0 | 0.7 | V | ||
Transmitter | ||||||
Single Ended Output Voltage Tolerance | 0.3 | 4 | V | |||
Common mode Voltage Tolerance | 15 | mV | ||||
Transmit Input Diff Voltage | VI | 300 | 1100 | mV | ||
Transmit Input Diff Impedance | Zin | 90 | 100 | 110 | Ω | |
Receiver | ||||||
Single Ended Output Voltage Tolerance | 0.3 | 4 | V | |||
Rx Output Diff Voltage | Vo | 500 | 800 | mV | ||
Transmit Output Diff Impedance | Zout | 90 | 100 | 110 | Ω |
Optical Characteristics
Parameter | Symbol | Min | Typ | Max | Unit | Ref. |
Transmitter | ||||||
Center Wavelength | λC | 1270 | 1310 | 1350 | nm | |
Side-mode Suppression Ratio | SMSR | 30 | - | - | dB | |
Average Launch Power, each Lane | Pav | -5.5 | - | 2.3 | dBm | |
Optical Modulation Amplitude, each Lane | Poma | -4.5 | 3.5 | dBm | ||
Difference in Launch Power between any two Lanes (OMA) | - | - | 5 | dB | ||
Launch Power in OMA minus Transmitter | ||||||
and Dispersion Penalty (TDP), each Lane | -9.7 | - | dBm | |||
Extinction Ratio | ER | 3.5 | - | - | dB | |
Transmitter Eye Mask Definition {X1, X2, X3, Y1, Y2, Y3} | {0.25, 0.4, 0.45, 0.25, 0.28, 0.4} | |||||
Optical Return Loss Tolerance | - | - | 12 | dB | ||
Average Launch Power OFF Transmitter, each Lane | Poff | -30 | dBm | |||
Relative Intensity Noise | Rin | -128 | dB/HZ | |||
Transmitter Reflectance | - | - | -12 | dB | ||
Receiver | ||||||
Damage Threshold | THd | 3 | dBm | |||
Receiver Reflectance | Rrx | -12 | dB | |||
Receiver Sensitivity(OMA), each Lane | SR | - | - | -11.5 | dBm | |
Difference in Receive Power between any two Lanes (OMA) | 5 | dB | ||||
Receive Electrical 3 dB upper Cutoff | ||||||
Frequency, each Lane | 12 | GHz | ||||
LOS De-Assert | LOSD | -15 | dBm | |||
LOS Assert | LOSA | -30 | dBm | |||
LOS Hysteresis | LOSH | 0.5 | dB |
Serial ID: Data Fields
Address | Size (Bytes) | Name | Description of Base ID Field |
Base ID fields | |||
128 | 1 | Identifier | Identifier Type of serial Module |
129 | 1 | Ext. Identifier | Extended Identifier of Serial Module |
130 | 1 | Connector | Code for connector type |
131-138 | 8 | Specification compliance | Code for electronic compatibility or optical compatibility |
139 | 1 | Encoding | Code for serial encoding algorithm |
140 | 1 | BR, nominal | Nominal bit rate, units of 100 MBits/s |
141 | 1 | Extended Rate select Compliance | Tags for extended rate select compliance |
142 | 1 | Length(SMF) | Link length supported for SMF fiber in km |
143 | 1 | Length(OM3 50um) | Link length supported for EBW 50/125um fiber (OM3), units of 2m |
144 | 1 | Length(OM2 50um) | Link length supported for 50/125um fiber (OM2), units of 1m |
145 | 1 | Length(OM1 62.5 um) | Link length supported for 62.5/125um fiber (OM1), units of 1m |
146 | 1 | Length (Copper) | Link length of copper or active cable, units of 1m |
147 | 1 | Device tech | Device technology |
148-163 | 16 | Vendor name | QSFP+ vendor name(ASCII) |
164 | 1 | Extended Module | Extended Module codes for InfiniBand |
165-167 | 3 | Vendor OUI | QSFP+ vendor IEEE company ID |
168-183 | 16 | Vendor PN | Part number provided by QSFP+ vendor(ASCII) |
184-185 | 2 | Vendor rev | Revision level for part number provided by vendor (ASCII) |
186-187 | 2 | Wavelength or Copper Cable Attenuation | Nominal laser wavelength (wavelength=value/20 in nm) |
188-189 | 2 | Wavelength tolerance | Guaranteed range of laser wavelength (+/- value) from nominal wavelength. (wavelength Tol.=value/200 in nm) |
190 | 1 | Max case temp. | Maximum case temperature in degrees C |
191 | 1 | CC_BASE | Check code for base ID fields (addresses 128-190) |
Extended ID fields | |||
192-195 | 4 | Options | Rate Select, TX Disable, TX Fault, LOS |
196-211 | 16 | Vendor SN | Serial number provided by vendor (ASCII) |
212-219 | 8 | Date Code | Vendor’s manufacturing date code |
220 | 1 | Diagnostic Monitoring Type | Indicates which types of diagnostic monitoring are implemented (if any) in the Module. Bit 1,0 Reserved |
221 | 1 | Enhanced Options | Indicates which optional enhanced features are implemented in the transceiver. |
222 | 1 | Reserved | |
223 | 1 | CC_EXT | Check code for the Extended ID Fields (addresses 192-222) |
Vendor-Specific ID Fields | |||
224-255 | 32 | Vendor Specific EEPROM |
Pin Descriptions
Pin | Logic | Symbol | Name/Description | Ref. |
1 | GND | Ground | 1 | |
2 | CML-I | Tx2n | Transmitter Inverted Data Input | |
3 | CML-I | Tx2p | Transmitter Non-Inverted Data output | |
4 | GND | Ground | 1 | |
5 | CML-I | Tx4n | Transmitter Inverted Data Output | |
6 | CML-I | Tx4p | Transmitter Non-Inverted Data Output | |
7 | GND | Ground | 1 | |
8 | LVTTL-I | ModSelL | Module Select | |
9 | LVTTL-I | ResetL | Module Reset | |
10 | VccRx | +3.3V Power Supply Receiver | 2 | |
11 | LVCMOS-I/O | SCL | 2-Wire Serial Interface Clock | |
12 | LVCMOS-I/O | SDA | 2-Wire Serial Interface Data | |
13 | GND | Ground | 1 | |
14 | CML-O | Rx3p | Receiver Inverted Data Output | |
15 | CML-O | Rx3n | Receiver Non-Inverted Data Output | |
16 | GND | Ground | 1 | |
17 | CML-O | Rx1p | Receiver Inverted Data Output | |
18 | CML-O | Rx1n | Receiver Non-Inverted Data Output | |
19 | GND | Ground | 1 | |
20 | GND | Ground | 1 | |
21 | CML-O | Rx2n | Receiver Inverted Data Output | |
22 | CML-O | Rx2p | Receiver Non-Inverted Data Output | |
23 | GND | Ground | 1 | |
24 | CML-O | Rx4n | Receiver Inverted Data Output | |
25 | CML-O | Rx4p | Receiver Non-Inverted Data Output | |
26 | GND | Ground | 1 | |
27 | LVTTL-O | ModPrsL | Module Present | |
28 | LVTTL-O | IntL | Interrupt | |
29 | VccTx | +3.3V Power Supply Transmitter | 2 | |
30 | Vcc1 | +3.3V Power Supply | 2 | |
31 | LVTTL-I | LPMode | Low Power Mode | |
32 | GND | Ground | 1 | |
33 | CML-I | Tx3p | Transmitter Inverted Data Output | |
34 | CML-I | Tx3n | Transmitter Non-Inverted Data Output | |
35 | GND | Ground | 1 | |
36 | CML-I | Tx1p | Transmitter Inverted Data Output | |
37 | CML-I | Tx1n | Transmitter Non-Inverted Data Output | |
38 | GND | Ground | 1 |
Ordering Information
Part Number | Description |
AQSFP-40G-PSM4-I | 40Gb/s 2km QSFP+ Transceiver Hot Pluggable, MPO Connector, Single mode |