Alpha Bridge AB-CVR-QSFP-SFP10G
Features
• Trouble-free installation and network bring-up
• Compliant to industry standards: QSFP+ MSA SFF-8436 / SFP+ MSA SFF-8431
• Precision process control for minimization of pair-to-pair skew
• 1 independent duplex channels operating at 10Gbps, also support for 2.5Gbps, 5Gbps data rates
• All-metal housing for superior EMI performance
• 100-ohm differential impedance system
• Operating case temperature: -20 to 85℃
• Low insertion loss
• Low crosstalk
• Secure latching mechanism
• RoHS compliant
Applications
• Data Servers, Routers, Switches
• Networked storage systems
• Data Center networking
• InfiniBand Trade Association (IBTA)
• IEEE-802.3ba
• MSA SFF-8431
Product Description
The QSFP+ to SFP+ Adapter (CVR) Module offers 10 Gigabit Ethernet connectivity for Quad Small Form-Factor Pluggable (QSFP) – only platforms. It allows smooth and cost-effective migration to 40 Gigabit Ethernet by providing an option to use lower-speed Enhanced Small Form-Factor Pluggable (SFP+) modules in empty QSFP ports or when the other end of the network is running at lower speeds.
The CVR Module converts a QSFP port into an SFP+ port. With this adapter, customers have the flexibility to use any SFP+ module or cable to connect to a lower-speed port on the other end of the network. This flexibility allows a cost-effective transition to 40 Gigabit Ethernet by maximizing the use of high-density 40 Gigabit Ethernet QSFP platforms. This adapter supports all SFP+ optics and cable reaches. Compatible Switch Models and SFP+ Modules. A list of SFP+ transceiver modules that can be plugged into the CVR module is provided in Table 1.
Item | Product Name | Product Description |
1 | SFP-10G-SR | 10GBASE-SR SFP+ Module for Multimode Fiber |
2 | SFP-10G-LR | 10GBASE-LR SFP+ Module for Single-Mode Fiber |
3 | SFP-10G-ER | 10GBASE-ER SFP+ Module for Single-Mode Fiber |
4 | SFP-10G-ZR | DWDM SFP+ Modules for Single-Mode Fiber |
5 | 10G SFP+ Copper Cables | SFP+ Copper Cables (1-m to 10-m lengths) |
6 | 10G SFP+ Active Optical Cables | SFP+ Active Optical Cables (1-m to 10-m lengths) |
Recommended Operating Conditions
Parameter | Symbol | Min | Max | Unit |
Operating Case Temperature | Topc | -20 | 85 | degC |
Storage Temperature | Tst | -40 | 125 | degC |
Relative Humidity (non-condensation) | RS | - | 85 | % |
Supply Voltage | VCC3 | 3.15 | 3.45 | V |
Pin Descriptions
Pin | Logic | Symbol | Name/Description | Note |
1 | GND | Ground | 1 | |
2 | CML-I | Tx2n | Transmitter Inverted Data Input | |
3 | CML-I | Tx2p | Transmitter Non-Inverted Data output | |
4 | GND | Ground | 1 | |
5 | CML-I | Tx4n | Transmitter Inverted Data Input | |
6 | CML-I | Tx4p | Transmitter Non-Inverted Data output | |
7 | GND | Ground | 1 | |
8 | LVTLL-I | ModSelL | Module Select | |
9 | LVTLL-I | ResetL | Module Reset | |
10 | VccRx | +3.3V Power Supply Receiver | 2 | |
11 | LVCMOS-I/O | SCL | 2-Wire Serial Interface Clock | |
12 | LVCMOS-I/O | SDA | 2-Wire Serial Interface Data | |
13 | GND | Ground | ||
14 | CML-O | Rx3p | Receiver Non-Inverted Data Output | |
15 | CML-O | Rx3n | Receiver Inverted Data Output | |
16 | GND | Ground | 1 | |
17 | CML-O | Rx1p | Receiver Non-Inverted Data Output | |
18 | CML-O | Rx1n | Receiver Inverted Data Output | |
19 | GND | Ground | 1 | |
20 | GND | Ground | 1 | |
21 | CML-O | Rx2n | Receiver Inverted Data Output | |
22 | CML-O | Rx2p | Receiver Non-Inverted Data Output | |
23 | GND | Ground | 1 | |
24 | CML-O | Rx4n | Receiver Inverted Data Output | 1 |
25 | CML-O | Rx4p | Receiver Non-Inverted Data Output | |
26 | GND | Ground | 1 | |
27 | LVTTL-O | ModPrsL | Module Present | |
28 | LVTTL-O | IntL | Interrupt | |
29 | VccTx | +3.3 V Power Supply transmitter | 2 | |
30 | Vcc1 | +3.3 V Power Supply | 2 | |
31 | LVTTL-I | LPMode | Low Power Mode | |
32 | GND | Ground | 1 | |
33 | CML-I | Tx3p | Transmitter Non-Inverted Data Input | |
34 | CML-I | Tx3n | Transmitter Inverted Data Output | |
35 | GND | Ground | 1 | |
36 | CML-I | Tx1p | Transmitter Non-Inverted Data Input | |
37 | CML-I | Tx1n | Transmitter Inverted Data Output | |
38 | GND | Ground | 1 |
SFP+ Host board Connector Pin-out for SFP+ Pin description
Pin | Logic | Symbol | Name/Description | Note |
1 | VeeT | Module Transmitter Ground | 1 | |
2 | LVTTL-O | Tx_Fault | Transmitter Fault | 2 |
3 | LVTTL-I | Tx_Disable | Transmitter Disable | 3 |
4 | LVTTL-I/O | SDA | MOD-DEF2 2-wire serial interface data line | 4 |
5 | LVTTL-I/O | SCL | MOD-DEF1 2-wire serial interface clock line | 4 |
6 | Mod_Abs | Module Absent | 5 | |
7 | LVTTL-I | RS0 | Rate Select Zero | |
8 | LVTTL- O | Rx_LOS | Module Receiver Loss of Signal | 2 |
9 | LVTTL-I | RS1 | Rate Select One | |
10 | VeeR | Module Receiver Ground | 1 | |
11 | VeeR | Module Receiver Ground | 1 | |
12 | CML-O | RD- | Receiver Inverted Data Output | |
13 | CML-O | RD+ | Receiver Non-Inverted Data Output | |
14 | VeeR | Module Receiver Ground | 1 | |
15 | VccR | Module Receiver 3.3V Supply | ||
16 | VccT | Module Transmitter 3.3V Supply | ||
17 | VeeT | Module Transmitter Ground | 1 | |
18 | CML-I | TD+ | Transmitter Non-Inverted Data Input | |
19 | CML-I | TD- | Transmitter Inverted Data Input | |
20 | VeeT | Module Transmitter Ground | 1 |
Physical Specifications
Maximum outer dimensions (H x W x D) | Weight |
13.5 x 18.4 x 78 mm | Typically, less than 100 g |
Ordering Information
Part Number | Description |
AB-CVR-QSFP-SFP10G | QSFP+ to SFP+ Adapter (CVR) Module |