Alpha Bridge-ASFPP-10G-SR

Features

  • Optical interface compliant to IEEE 3ae 10GBASE-SR
  • Electrical interface compliant to SFF-8431
  • Hot Pluggable
  • 850nm VCSEL transmitter, PIN photo-detector
  • Maximum link length of 300m on 2000MHz/km MMF
  • Operating case temperature: 0 to 70 °C
  • Low power consumption
  • Maximum link length of 300m on 2000MHz/km MMF
  • All-metal housing for superior EMI performance
  • Advanced firmware allows customer system encryption information to be stored in the transceiver
  • Cost effective SFP+ solution, enables higher port densities and greater bandwidth
  • RoHS6 compliant (lead-free)

Applications

  • 10GBASE-SR at 10.3125Gbps
  • 10GBASE- SW at 9.953Gbps
  • Other optical links

Absolute Maximum Ratings

Parameter Symbol Min. Typ. Max. Units Notes
Storage Temperature Tc -40   85 °C  
Operating Case Temperature Tc 0   70 °C  
Power Supply Voltage VCC 0   3.6 V  
Relative Humidity RH 5   95 %  
RX Input Average Power Pmax ICC     0 dBm  

Recommended Operating Conditions

Parameter Symbol Min. Typ. Max. Units
Supply Voltage Vcc 3.0 3.3 3.6 V
Supply Current Icc   300 450 mA
Operating Case Temperature Tc 0 25 70 °C
Module Power Dissipation Pm - 1 1.5 W

Diagnostics Monitoring

Parameter/Range Symbol Accuracy Unit Notes
Temperature monitor absolute error DMI_Temp ± 3 °C  
Supply voltage monitor absolute error DMI_VCC ±0.3 V  
TX power DMI_TX ± 3 dB dBm  
RX power DMI_RX ± 3 dB dBm  
Bias Current monitor DMI_Ibias ± 10% mA  

Optical Characteristics

Parameter Symbol Min. Typ. Max. Units Note
Transmitter
Center Wavelength λt 840 850 860 nm  
RMS spectral width Pm - - Note 1 nm  
Average Optical Power Pavg -6.5 - -1 dBm 2
Extinction Ratio ER 3.5 - - dB 3
Transmitter Dispersion Penalty TDP - - 3.9 dB  
Relative Intensity Noise Rin - - -128 dB/Hz 12dB reflection
Optical Return Loss Tolerance   - - 12 dB  
Receiver
Center Wavelength λr 840 850 860 nm  
Receiver Sensitivity Psens - - -11.1 dBm 4
Stressed Sensitivity in OMA   - - -7.5 dBm 4
Los function Los -30 - -12 dBm  
Overload Pin - - -1.0 dBm 4
Receiver Reflectance   - - -12 dB  

Electro Characteristics

Parameter Symbol Min. Typ. Max. Units Note
Data Rate   - 10.3125 - Gbps  
Power Consumption   - 1200 1500 mV  
Transmitter
Single Ended Output Voltage Tolerance   -0.3 -4.0 4.0 V  
C common mode voltage tolerance   15 --   mV  
Tx Input Diff Voltage VI 180   700 mV  
Tx Fault VoL -0.3   0.4 V At 0.7mA
Data Dependent Input Jitter DDJ     0.10 UI  
Data Input Total Jitter TJ     0.28 UI  
Receiver
Single Ended Output Voltage Tolerance   -0.3 - 4.0 V  
Rx Output Diff Voltage Vo 300   850 mV  
Rx Output Rise and Fall Time (20% to 80%) Tr/Tf 30     ps 20% to 80%
Total Jitter TJ     0.70 UI  
Deterministic Jitter DJ     0.42 UI  

Pin Descriptions

Pin Symbol                                         Function/Description Notes
1 VEET Transmitter Ground 1
2 Tx_FAULT Transmitter Fault 2
3 Tx_DIS Transmitter Disable. Laser output disabled on high or open 3
4 SDA 2-wire Serial Interface Data Line 2
5 SCL 2-wire Serial Interface Clock Line 2
6 MOD_ABS Module Absent. Grounded within the module 4
7 RS0 Rate Select 0 5
8 RX_LOS Loss of Signal indication. Logic 0 indicates normal operation 2
9 RS1 Rate Select 1 5
10 VEER Receiver Ground 1
11 VEER Receiver Ground 1
12 RD- Receiver Inverted DATA out. AC Coupled  
13 RD+ Receiver DATA out. AC Coupled  
14 VEER Receiver Ground 1
15 VCCR Receiver Power Supply  
16 VCCT Transmitter Power Supply  
17 VEET Transmitter Ground 1
18 TD+ Transmitter DATA in. AC Coupled  
19 TD- Transmitter Inverted DATA in. AC Coupled  
20 VEET Transmitter Ground 1

Ordering Information

Model Number Part Number Wavelength Temperature
ASFPP-10G-SR OPAT-MX3-85-CB 850nm 0°C to 70 °C
Scroll to Top