AGPON-OLT-C++ -

Features

Support ITU-T 984.2 GPON OLT C++ application.
Single fiber bi-directional data links with symmetric 488Gbps Tx and 1.244Gbps Rx
1490nm continuous-mode transmitter with DFB LD
1310nm burst-mode receiver with APD-TIA
2-wire interface for integrated digital diagnostic Monitoring
Receiver RESET, Signal Detect, RSSI function indication (RESET, RX_SD, RSSI)
SFP package with SC/UPC receptacle optical interface
Single +3.3V power supply
Operation case temperature -40~85°C for industrial and 0~70°C for commercial
RoHS6 compliance

Parameter	Unit	Min.	Typical	Max.
Storage Temperature	°C	-40		85
Operating Case Temp for C-temp	°C	0		70
Operating Case Temp for I-temp	°C	-40		85
Operating Relative Humidity	%	5		95
Power Supply Voltage	V	3.15	3.3	3.45
Supply Current	mA			600
Bit Rate for Tx	Gbps	2.488
Bit Rate for Rx	Gbps	1.244

Parameter	Unit	Min.	Typical	Max.
Transmitter
TX Central Wavelength	nm	1480	1490	1500
Spectral Width (-20dB)	nm			1
Side Mode Suppression Ratio (SMSR)	dB	30
Mean Launched Power	dBm	3		7
Mean Launched Power (TX Off)	dBm			-45
Extinction Ratio	dB	8.2
Optical Return Loss Tolerance	dB	-12
Transmitter and dispersion Penalty	dB			1
Transmitter Mask (PRBS223-1@2.488G)	Compliant With ITU-T G.984.2
Receiver
Receive Wavelength	nm	1290	1310	1330
Sensitivity (PRBS223-1@1.244G,ER=10,BER<10-10)	dBm			-30
Overload (PRBS223-1@1.244G,ER=10,BER<10-10)	dBm	-12
Receiver Burst Mode Dynamic Range	dB	15
Damage Threshold for Receiver	dBm	5
SD Assert Level	dBm			-33
SD De-assert Level	dBm	-45
SD Hysteresis	dB	0.5		6
WDM Filter isolation to 1550nm	dB	38
WDM Filter isolation to 1650nm	dB	35
Electrical Interface Characteristics
Data Input Swing Differential/TX	mV	200	-	2000
Data Output Swing Differential/RX	mV	400		1600
Date Differential Impedance	Ω	90	100	110
LVTTL Output High	V	2.4		Vcc
LVTTL Output Low	V	0		0.4
LVTTL Input High	V	2		Vcc+0.3
LVTTL Input Low	V	0		0.8
Timing Characteristics
Guard Time (Tg)	ns	25.6
Reset Pulse Width (Tr)	ns			12.8
Reset Delay (Trd)	ns			12.8
Receiver Preamble Time (Tp)	ns			140
SD Assert Time (TSDA)	ns			100
SD De-assert Time (TSDD)	ns			12.8
RSSI Trigger Delay (Ttd)	ns	25
RSSI Trigger Pulse Width (Tw)	ns	500
Internal I2C Delay (Twait)	us			500

Pin No.	Symbol	Level / Logic	Description
1	VeeT		Module Transmitter Ground
2	Tx_Fault	LVTTL-O	Module Transmitter Fault
3	Tx_DIS	LVTTL-I	Laser output is disabled when this pin is asserted high or left unconnected
4	SDA	LVTTL-I	2-Wire Serial Interface Data Line
5	SCL	LVTTL-I/O	2-Wire Serial Interface Clock
6	MOD_ABS	LVTTL-O	Module Absent, connected to ground in the module
7	RX_Reset	LVTTL-I	Receiver RESET signal
8	RX_SD	LVTTL-O	Receiver Signal Detected Indication
9	RSSI_TRIG	LVTTL-I	Receiver RSSI Trigger signal
10	VeeR		Module Receiver Ground
11	VeeR		Module Receiver Ground
12	RD-	LVPECL-O	Receiver Inverted Data Output
13	RD+	LVPECL-O	Receiver Non-Inverted Data Output
14	VeeR		Module Receiver Ground
15	VccR		Module Receiver 3.3V Supply
16	VccT		Module Transmitter 3.3V Supply
17	VeeT		Module Transmitter Ground
18	TD+	LVPECL-I	Transmitter Non-Inverted Data Input
19	TD-	LVPECL-I	Transmitter Inverted Data Input
20	VeeT		Module Transmitter Ground

Model	Description
AGPON-OLT-C++	GPON OLT SFP 2.5G/1.25Gbps Tx1490/Rx1310nm 20km SC C++ ＞5db
AGPON-OLT-C++-HW	GPON OLT SFP 2.5G/1.25Gbps Tx1490/Rx1310nm 20km SC C++ ＞5db
AGPON-OLT-C++-ZT	GPON OLT SFP 2.5G/1.25Gbps Tx1490/Rx1310nm 20km SC C++ ＞5db