Alpha Bridge ASFP-10G-ER33B-I

Features

  • Support 95Gb/s to 10.3Gb/s data rates
  • Simplex LC Connector Bi-Directional SFP+ Optical Transceiver
  • Single 3V Supply
  • Up to 40km on 9/125um SMF
  • 1330nm DFB Laser transmitter,1270nm receiver
  • SFP+ MSA SFF-8431 Compliant
  • Digital Diagnostic SFF-8472 Compliant
  • RoHS compliant and Lead-Free
  • Operating case temperature: 0°C ~70°C

Applications

  • 10GBASE-ER at 10.3125Gbps
  • 10GBASE-EW at 953Gbps
  • Other Optical Links

Absolute Maximum Ratings

Parameters Symbol Min. Max. Units
Supply Voltage VCC -0.5 3.6 V
Storage Temperature Tc -40 85 °C
Operating Case Temperature Tc 0 70 °C
Relative Humidity RH 0 85 %

Recommended Operating Conditions

Parameter Symbol Min. Typ. Max. Units
Supply Voltage VCC 3 3.3 3.6 V
Supply Current Icc   300 450 mA
Operating Case Temperature TC 0 25 70 °C
Module Power Dissipation Pm - 1 1.5 W

Diagnostics

Parameters Symbol Accuracy Unit Notes
Temperature monitor absolute error DMI_Temp ± 3 oC  
Supply voltage monitor absolute error DMI_VCC ±0.3 V  
TX power DMI_TX ± 3 dB dBm  
RX power DMI_RX ± 3 dB dBm  
Bias Current monitor DMI_Ibias ± 10% mA  

Optical Characteristics

Parameter Symbol Min. Typ. Max. Units Notes
Transmitter
Optical Wavelength λC 1320 1330 1340 nm  
Side Mode Suppression Ratio SMSR 30     dB  
Spectral Width (-20dB) Δλ     1 nm  
Average Output Power Pop 1   5 dBm 1
Extinction Ratio ER 3.5     dB  
Eye Mask Compliant with IEEE 802.3
Transmitter Dispersion Penalty TDP   3.2 dB  
Launch Power of OFF Transmitter POUT_OFF   -30 dBm  
Relative Intensity Noise RIN   -128 dB/Hz  
Receiver
Center wavelength λC 1260 1270 1280 nm  
Average Receiver Power PSENS     -15 dBm 1,2
Receiver Overload PMAX     0.5 dBm  
LOS Assert LOSA -30     dBm  
LOS De-assert LOSD     -15 dBm  
LOS Hysteresis LOSH 0.5     dB  

Electrical Characteristics

Parameter Symbol Min. Typ. Max. Units Note
Transmitter
Input differential impedance RIN   100   Ω 2
Single-ended data input swing Vin_PP 150   1200 mVpp  
Transmit Disable Voltage VD 2   Vcc V  
Transmit Enable Voltage VEN VEE   VEE+0.8 V 3
Receiver
Output Differential impedance Rout   100   Ω 2
Single-Ended Data Output Swing VOUT_PP 300   700 mV 4
LOS Fault VLOS fault 2   VCCHOST V 5
LOS Normal VLOS norm VEE   VEE+0.8 V 5

Pin Descriptions

Pin Name Description Notes
1 VEET Transmitter ground (common with receiver ground) 1
2 TX_FAULT Transmitter Fault 2
3 TX_DISABLE Transmitter Disable. Laser output disabled on high or open 3
4 SDA 2-wire Serial Interface Data Line 4
5 SCL 2-wire Serial Interface Clock Line 4
6 MOD_ABS Module Absent. Grounded within the module 4
7 RS0 No connection required  
8 LOS Loss of Signal indication. Logic 0 indicates normal operation 5
9 RS1 No connection required 1
10 VEER Receiver ground (common with transmitter ground) 1
11 VEER Receiver ground (common with transmitter ground) 1
12 RD– Receiver Inverted DATA out. AC coupled  
13 RD+ Receiver Non-inverted DATA out. AC coupled  
14 VEER Receiver ground (common with transmitter ground) 1
15 VCCR Receiver power supply  
16 VCCT Transmitter power supply  
17 VEET Transmitter ground (common with receiver ground) 1
18 TD+ Transmitter Non-Inverted DATA in. AC coupled  
19 TD– Transmitter Inverted DATA in. AC coupled  
20 VEET Transmitter ground (common with receiver ground) 1

Ordering Information

Model Number Part Number Reach Input/Output TX/RX Signal Detect Voltage Temperature
ASFPP-10G-ER33B OPAK-W40-33-CF 40 km AC/AC 1330/1270 TTL 3.3V 0°C to 70 °C
ASFPP-10G-ER33B-I OPAK-W40-33-CF 40 km AC/AC 1330/1270 TTL 3.3V -40°C to 85 °
Download Brochure
Scroll to Top