Alpha Bridge AXFP-10G-ZR

Features

  • Compliant with XFP MSA INF-8077i.
  • Compliant with 3ae 10GBASE-ZW/ZR Ethernet.
  • Compliant with SONET OC-192/SDH STM-64 ITU-TG.959.1 P1L1-2D2.
  • Compliant with SONET OC-192/SDH STM-64 with ITU-T 709.
  • Compliant with 80km 10G Ethernet with ITU-T 709 FEC.
  • Compliant with 80km 10G Fiber Channel.
  • Differential LVPECL inputs and CML outputs.
  • TTL signal detect.
  • Hot Pluggable.
  • Power consumption<3.5W.
  • Class 1 laser product complies with EN 60825-1.
  • RoHS Compliant.

Absolute Maximum Ratings AXFP-10G-ZR

Parameter Symbol Min. Max. Units Note
Storage Temperature TS -40 85 °C  
Supply Voltage Vcc3 -0.5 4.0 V  
Input Voltage VIN -0.5 6.0 V  

Recommended Operating Conditions AXFP-10G-ZR

Parameter Symbol Min. Max. Units Note
Case Operating Temperature TC -5 70 °C  
Supply Voltage Vcc3 3.1 3.5 V  
Supply Current Icc3 --- 500 mA  
Supply Voltage Vcc5 4.5 5.5 V  
Supply Current Icc5 --- 350 mA  

Diagnostics AXFP-10G-ZR

Data Address Parameter Range Accuracy
96-97 Temperature -40 °C to 85 °C ±3°C
100-101 Bias Current 0 to 120mA ±10%
102-103 TX Power -1 to +5dBm ±2dB
104-105 RX Power -24 to -6dBm ±2dB
106-107 Vcc3 Voltage 2.9~3.7 Volts ±3%
108-109 Vcc5 Voltage 4.5~5.5 Volts ±3%

Transmitter Electro-optical Characteristics AXFP-10G-ZR

Parameter Symbol Min. Typ. Max. Units Note
Operating Date Rate   9.95   11.3 Gbps  
Input Reference Clock Rate     Not Required    
Output Optical Power Pout 0 --- 4 dBm  
Extinction Ratio ER 9     dB  
Center Wavelength λC 1530   1565 nm  
Sidemode Supression ratio SSRmin 30       dB
Relative Intensity Noise RIN --- --- -130 dB/Hz  
Output Eye Compliant with IEEE802.3ae
Differential Input Voltage VDIFF 0.12 --- 1.0 V
Transmit Fault Output-Low TX_FAULTL 0.0 --- 0.5 V
Transmit Fault Output-High TX_FAULTH 2.4 --- Vcc V
TX_DISABLE Assert Time t_off --- --- 10 μs
TX_DISABLE Negate Time t_on --- --- 2 ms
Time to initialize t_init --- --- 300
Interrupt/assert delay Interrupt _on --- --- 200 ms
Interrupt negate delay Interrupt_off --- --- 500
P_Down/RST assert delay P_Down/RST_on   100 ms
Mod_NR assert delay Mod_nr_on   1 ms
Mod_NR negate delay Mod_nr_off   1 ms
P-Down reset time   10   ms
RX_LOS assert delay t_loss_on   μs
RX_LOS negate delay t_loss_off   100 μs

Receiver Electro-optical Characteristics AXFP-10G-ZR

Parameter Symbol Min. Typ. Max. Units Note
Optical Input Power-maximum PIN -7 --- --- dBm BER < 1012
Receiver Sensitivity PIN --- --- -23 dBm BER < 1012
Receiver Sensitivity (OMA) PIN --- --- -22.1 dBm BER < 1012
Operating Center Wavelength °C 1270 --- 1600 nm  
Receiver Reflectance Rrx 27 --- --- dB  
Dispersion Panelty       3 dB 80 km
Loss of Signal-Asserted PA --- --- -30 dBm  
Loss of Signal-Deasserted PD -22 --- --- dBm  
Differential Output Voltage VDIFF 0.6   0.8 V  
TTL Input High Voltage   2   Vcc V  
TTL Input Low Voltage   0   0.8 V  
TTL output High Voltage   2.4 --- Vcc V  
TTL output Low Voltage   0 --- 0.4 V  
Receiver Loss of Signal Assert Time (off to on) tA,RX_LOS --- --- 100 μs  
Recover Loss of Signal Assert Time (on to off) tD,RX_LOS --- --- 100 μs  

Pin Description AXFP-10G-ZR

Pin Logic Symbol Name/Description Note
1   GND Module Ground 1
2   VEE5 Optional -5.2V Power Supply  
3 LVTTL-I Mod_DeSel Module De-select; When held low allows module to respond to 2-wire serial interface  
4 LVTTL-O   Interrupt Interrupt; Indicates presence of an important condition which can be read over the 2-wire serial interface 2
5 LVTTL-I TX_DIS Transmitter Disable; Turns off transmitter laser output  
6   VCC5 +5V Power Supply  
7   GND Module Ground 1
8   VCC3 +3.3V Power Supply  
9   VCC3 +3.3V Power Supply  
10 LVTTL-I/O SCL 2-Wire Serial Interface Clock 2
11 LVTTL-I/O SDA 2-Wire Serial Interface Data Line 2
12 LVTTL-O Mod_Abs Indicates Module is not present. Grounded in the Module 2
13 LVTTL-O Mod_NR Module Not Ready; Indicating Module Operational Fault 2
14 LVTTL-O RX_LOS Receiver Loss of Signal Indicator 2
15   GND Module Ground 1
16   GND Module Ground 1
17 CML-O RD- Receiver Inverted Data Output  
18 CML-O RD+ Receiver Non-Inverted Data Output  
19   GND Module Ground 1
20   VCC2 +1.8V Power Supply 3
    21     LVTTL-I P_Down/RST Power down; When high, requires the module to limit power consumption to 1.5W or below, 2-Wire serial interface must be functional in the low power mode.
Reset; The falling edge initiates a complete reset of the module including the 2-wire serial interface, equivalent to a power cycle.
22   VCC2 +1.8V Power Supply 3
23   GND Module Ground 1
24 PECL-I RefCLK+ Not Required  
25 PECL-I RefCLK-  
26   GND Module Ground 1
27   GND Module Ground 1
28 CML-I TD- Transmitter Inverted Data Input  
29 CML-I TD+ Transmitter Non-Inverted Data Input  
30   GND Module Ground 1

Ordering Information AXFP-10G-ZR

Model Number Part Number Reach Input/Output Signal Detect Voltage Temperature
AXFP-10G-ZR OP7K-S80-15-C 80 km AC/AC TTL 3.3V/5V -5°C to 70 °C
AXFP-10G-ZR-I OP7K-S80-15-I 80 km AC/AC TTL 3.3V/5V -40°C to 85 °C
DOWNLOAD BROCHURE
Scroll to Top