Alpha Bridge AXFP-10G-ER13

Features

  • Compliant with XFP-MSA INF-8077i
  • Compliant with 10GFC 1200-SM-LL-L Fiber Channel Standard
  • Compliant with IEEE802.3ae 10GBASE-LW/LR Ethernet
    Standard
  • Compliant with SONET OC-192 SR-1
    SDH STM I-64.1
  • Compliant with 10GB over ITU G.709
  • Compliant with ITU G.709
  • Differential LVPECL inputs and CML outputs
  • Single power supply 3.3V
  • TTL signal detec indicator
  • Hot Pluggable
  • Class 1 laser product complies with EN 60825-1
  • RoHS Compliant

Absolute Maximum Ratings AXFP-10G-ER13

Parameter Symbol Min. Max. Units Note
Storage Temperature TS -40 85 °C  
Supply Voltage Vcc3 -0.5 4.0 V  
Input Voltage VIN -0.5 Vcc V  

Recommended Operating Conditions AXFP-10G-ER13

Parameter Symbol Min. Max. Units Note
Case Operating Temperature TC 0 70 °C  
Supply Voltage Vcc3 3.1 3.5 V  
Supply Current Icc3 --- 500 mA  

Diagnostics AXFP-10G-ER13

Data Address Parameter Range Accuracy
96-97 Temperature -35 °C to 95 °C ±3°C
100-101 Bias Current 0 to 100mA ±10%
102-103 TX Power -8 to +2.5dBm ±2dB
104-105 RX Power -16.5 to +1.5dBm ±2dB
106-107 Vcc3 Voltage 2.9~3.7 Volts ±3%

Transmitter Electro-optical Characteristics AXFP-10G-ER13

Parameter Symbol Min. Typ. Max. Units Note
Operating Date Rate 9.95 11.3 Gbps
Input Reference Clock Rate       Not required    
Output Optical Power Pout -6 --- -1 dBm  
Extinction Ratio ER 6     dB  
Center Wavelength °C 1290   1330 nm  
Sidemode Supression ratio SSRmin 30       dB
Relative Intensity Noise RIN --- --- -130 dB/Hz  
Output Eye Compliant with IEEE802.3ae
Differential Input Voltage VDIFF 0.25 --- 1.0 V
Transmit Fault Output-Low TX_FAULTL 0.0 --- 0.5 V
Transmit Fault Output-High TX_FAULTH 2.4 --- Vcc V
TX_DISABLE Assert Time t_off --- --- 10 μs
TX_DISABLE Negate Time t_on --- --- 2 ms
Time to initialize t_init --- --- 300 ms
  Interrupt assert delay   Interrupt _on --- --- 200 ms
Interrupt negate delay                 Interrupt_off --- --- 500 ms
P_Down/RST assert delay P_Down/RST_on     100 ms
Mod_NR assert delay Mod_nr_on     1 ms
Mod_NR negate delay Mod_nr_off     1 ms
P-Down reset time   10     μs
RX_LOS assert delay t_loss_on     100 μs
RX_LOS negate delay t_loss_off     100 μs

Receiver Electro-optical Characteristics AXFP-10G-ER13

Parameter Symbol Min. Typ. Max. Units Note
Receiver Sensitivity   -14.4 --- 0.5 dBm BER < 10-12
Receiver Sensitivity (OMA) PIN --- --- -12.6 dBm BER < 10-12
Stress Receiver Sensitivity (OMA) PIN --- --- -10.3 dBm BER < 10-12
Operating Center Wavelength °C 1270 --- 1600 nm
Optical Return Loss ORL 12 --- --- dB  
Loss of Signal-Asserted PA --- --- -30 dBm  
Loss of Signal-Deasserted PD -18 --- --- dBm  
Differential Output Voltage VDIFF 0.5 0.65 0.8 V  
TTL Input High Voltage   2   Vcc V  
TTL Input Low Voltage   0   0.8 V  
TTL output High Voltage   2.4 --- Vcc V  
TTL output Low Voltage   0 --- 0.4 V  
Receiver Loss of Signal Assert Time (off to on) tA,RX_LOS --- --- 100 μs  
Recover Loss of Signal Assert Time (on to off) tD,RX_LOS --- --- 100 μs  

Pin Description AXFP-10G-ER13

Pin Logic Symbol Name/Description Note
1   GND Module Ground 1
2   VEE5 Optional -5.2V Power Supply  
3 LVTTL-I Mod_DeSel Module De-select; When held low allows module to respond to 2-wire serial interface  
4 LVTTL-O   Interrupt Interrupt; Indicates presence of an important condition which can be read over the 2-wire serial interface 2
5 LVTTL-I TX_DIS Transmitter Disable; Turns off transmitter laser output  
6   VCC5 +5V Power Supply  
7   GND Module Ground 1
8   VCC3 +3.3V Power Supply  
9   VCC3 +3.3V Power Supply  
10 LVTTL-I/O SCL 2-Wire Serial Interface Clock 2
11 LVTTL-I/O SDA 2-Wire Serial Interface Data Line 2
12 LVTTL-O Mod_Abs Indicates Module is not present. Grounded in the Module 2
13 LVTTL-O Mod_NR Module Not Ready; Indicating Module Operational Fault 2
14 LVTTL-O RX_LOS Receiver Loss of Signal Indicator 2
15   GND Module Ground 1
16   GND Module Ground 1
17 CML-O RD- Receiver Inverted Data Output  
18 CML-O RD+ Receiver Non-Inverted Data Output  
19   GND Module Ground 1
20   VCC2 +1.8V Power Supply 3
    21     LVTTL-I     P_Down/RST Power down; When high, requires the module to limit power consumption to 1.5W or below, 2-Wire serial interface must be functional in the low power mode.  
Reset; The falling edge initiates a complete reset of the module including the 2-wire serial interface, equivalent to a power cycle.
22   VCC2 +1.8V Power Supply 3
23   GND Module Ground 1
24 PECL-I RefCLK+ Not Required  
25 PECL-I RefCLK-  
26   GND Module Ground 1
27   GND Module Ground 1
28 CML-I TD- Transmitter Inverted Data Input  
29 CML-I TD+ Transmitter Non-Inverted Data Input  
30   GND Module Ground 1

Ordering Information AXFP-10G-ER13

Model Number Part Number Reach Input/Output Signal Detect Voltage Temprature
AXFP-10G-ER13 OP7K-S10-13-C 10 km AC/AC TTL 3.3V 0°C to 70 °C
Download broucher
Scroll to Top